Parachute Zephyr for Matrice 300 RTK

The Zéphyr M300 simple parachute and circuit breaker assembly for the DJI Matrice 300 RTK drone allows you to secure your flights and slow down the fall rate of your Matrice 300 RTK in case of a problem, simply by asking for the motors to be switched off and the parachute to be deployed with the dedicated autonomous remote control. You have the choice between internal or external circuit breaker. Ability to easily and quickly remove the parachute from your drone, especially during an S2 scenario. The lightest parachute system on the market: only 450 g! The basic parachute kit includes an ultra-fast CO2 release system and a dedicated autonomous remote control with 30 hours of autonomy (attachable to the Smart Controller). The parachute is also available in a DGAC S2 S3 approved kit with an internal circuit breaker (to be installed in the workshop) or external (to be placed between the batteries and the drone). Each version of the circuit breaker includes an audible alarm and support for powering and charging the parachute when the drone is switched on. The lightest parachute system with motor cut-off in the world! The parachute kit + internal circuit breaker is the lightest solution available on the market, with a total weight of only 455 g. It maintains the largest payload for the DJI M300 in S3 scenario: 1.25 kg of available payload! In scenario S2, the maximum possible payload increases to 2.25 kg. Keep in mind that with an equivalent payload, the flight time with the Zéphyr parachute is longer than with any other parachute system. The internal circuit breaker is installed in the drone by us in the workshop. The operation is reversible, does not alter the drone and ensures that the DJI factory warranty is maintained. The audio alarm module connects to the USB-C connector available under the drone. The circuit breaker can be used alone, without a parachute, to increase the available payload and flight time for the S2 scenario. The payload capacity of the Matrice 300 in scenario S2 increases to 2.7 kg in this configuration! Ultra-fast system configuration Attached to the 4 upper threads of the drone, the parachute can be disassembled in less than a minute. An optional support is available in our shop to attach it under the drone when using the upper gimbal. The external circuit breaker kit can also be disassembled in seconds. The circuit breaker modules are easily inserted between the batteries and the drone. They immediately include the sound alarm. Their weight is 200 g. All elements of the kit can be stored in the original flight case provided by DJI with the drone. The fastest, most reliable and efficient CO2 system The CO2 emissions system of the Zéphyr parachutes has been proven and used by a majority of French drone pilots for more than 5 years. Countless tests and successive improvements have brought this system to a level of reliability never before achieved on a drone parachute. Pressurised gas (60 bar!) is released in a fraction of a second to propel the parachute tissue out of its container. The excess gas released (each cartridge contains several dozen litres) is used to accelerate the deployment of the trajectories and minimise height loss during parachute release. The system can be reset within seconds. The CO2 cartridge is the only consumable that is replaced after deployment on the system and a cartridge costs only a few euros. On the Zéphyr M300 single canvas parachute system, the CO2 release system allows the canvas to be ejected and opened in just 1.2 s, corresponding to a height loss of 15 m from an initial drop speed of about 6 m/s. The lightest, most stable and most efficient drone parachute fabrics The new PARA² fabrics used in Zéphyr parachute systems are the result of 3 years of development. Their innovative ultralight design and unique design give PARA² fabrics superior efficiency and stability. On single cloth systems, the sink rate is minimised relative to the cloth area. When used in pairs, PARA² fabrics do not interfere with each other and optimise the overall sink rate. Each Zéphyr parachute is designed so that the web(s) keep the drone as flat as possible during its fall to minimise damage on impact. On the Zéphyr M300 single-orbit parachute system, the fall velocity for an 8 kg mass is only 3.2 m/s, i.e. an impact energy of only 41 J, much lower than the maximum of 69 J allowed in France. An encrypted long-range communication system The long-range communication system between the radio and the parachute is based on advanced technologies and LoRa modulation. The range can reach several kilometres in optimal conditions, and a long-range option allows it to exceed 10 km. The communication protocol is based on 869 MHz frequencies, authorisation-free (options 433 and 915 MHz possible). 128-bit encryption ensures that data is not intercepted and that the user is notified in case of communication failures. Practical functions for the user The parachute, circuit breaker and radio control modules are equipped with LEDs indicating status and advanced functions. When switched on and off, the LEDs indicate the remaining battery charge, as well as the level of batteries while charging. In operation, they indicate the instantaneous state of the system: correct operation, loss of radio link, low battery level.... Combined with a circuit breaker, the parachute automatically lights up when the drone is on. Without a signal and if you forget to switch off the parachute or radio control, the modules automatically switch off after 10 minutes. A system of timestamps and integrated logs on the parachute and radio. It records trigger actions performed by the user for diagnostic purposes. Many options... ahead of regulations! Thanks to the options available with the Zéphyr parachutes, you are one step ahead of French and European regulations. On the remote control side, it is possible to add a second redundant trigger button. This second button avoids unwanted pressing of a single button and doubles the autonomy of the remote control. Safety caps protect the buttons from unintentional pressing. A buzzer module is available on request. It generates an audible warning in case of loss of connection to the parachute. With a long-range option, the radio range can be extended to more than 10 km if required. It is also possible to connect several radio controls to one parachute, or several parachutes to one radio control. On the parachute side, a crash detection and automatic deployment module is available upon request. this module will eventually be compatible with ASTM3322 standards and future European standards (classes C5 and C6 for scenarios STS-01 and STS-02).