BLUETTI EB3A + PV120 Solargenerator-Bausatz

Ja.

Calculate the total wattage of your devices. The EB3A can work if the total load does not exceed 600W.

Running time = Battery capacity × Depth of Discharge (DoD) × Inverter efficiency (η) ÷ Device rated power.

For the EB3A, with DoD and η both at 90%, running a 100W LED light will give approximately 2.17 hours.

Note: This formula is not suitable for inductive loads such as refrigerators.

The EB3A supports a maximum input charging power of 430W via AC and solar charging simultaneously.

Yes. Control is supported via Bluetooth using the BLUETTI App.

The EB3A is compatible with solar panels with a 12–28V open-circuit voltage, up to 200W input, and MC4 connectors.

BLUETTI PV120 and PV200 solar panels are highly recommended.

No. It is not waterproof. Avoid storing the power station in a humid environment for an extended period.

Store it in a dry, well-ventilated place and recharge it to approximately 80% capacity every three to six months.

The operating temperature ranges are:

• Charging: 0–40°C
• Discharging: -20–40°C
• Storage: -10–45°C

The EB3A can power devices in sub-zero temperatures, but charging should be avoided.

No. It should be kept upright to protect its internal structure and maintain optimal performance.

No. If the battery pack malfunctions, contact BLUETTI Customer Service.

No. The EB3A capacity cannot be expanded by connecting additional batteries.