The Z\u00e9phyr M300 simple parachute and circuit breaker assembly for the DJI Matrice 300 RTK drone allows you to secure your flights and slow down the fall rate of your Matrice 300 RTK in case of a problem, simply by asking for the motors to be switched off and the parachute to be deployed with the dedicated autonomous remote control.
\nYou have a choice between internal or external circuit breaker.
\nAbility to easily and quickly remove the parachute from your drone, especially during an S2 scenario.
\nThe lightest parachute system on the market: only 450 g!
\nThe basic parachute kit includes an ultra-fast CO2 emission system and a dedicated autonomous remote control with 30 hours of autonomy (attachable to the Smart Controller).
\nThe parachute is also available in a DGAC S2 S3 approved kit with an internal circuit breaker (to be installed in the workshop) or external (to be placed between the batteries and the drone). Each version of the circuit breaker includes an audible alarm and support for powering and charging the parachute when the drone is switched on.
\nThe lightest parachute system with engine shutdown in the world!
\nThe parachute kit + internal circuit breaker is the lightest solution available on the market, with a total weight of only 455 g. It maintains the largest payload for the DJI M300 in S3 scenario: 1.25 kg of available payload! In scenario S2, the maximum possible payload increases to 2.25 kg.
\nKeep in mind that with an equivalent payload, the flight time with the Z\u00e9phyr parachute is longer than with any other parachute system.
\nThe internal circuit breaker is installed in the drone by us in the workshop. The operation is reversible, does not modify the drone and ensures that the DJI factory warranty is maintained. The audio alarm module connects to the USB-C connector available under the drone.
\nThe circuit breaker can be used alone, without a parachute, to increase the available payload and flight time for the S2 scenario. The payload capacity of the Matrice 300 in scenario S2 increases to 2.7 kg in this configuration!
\nUltra-fast system configuration
\nAttached to the drone's 4 upper threads, the parachute can be disassembled in less than a minute. An optional support is available in our shop to attach it under the drone when using the upper gimbal.
\nThe kit with the external circuit breakers can also be disassembled in seconds. The circuit breaker modules are easily inserted between the batteries and the drone. They immediately include the sound alarm. Their weight is 200 g.
\nAll elements of the kit can be stored in the original flight case provided by DJI with the drone.
\nThe fastest, most reliable and efficient CO2 system
\nThe CO2 emission system of the Z\u00e9phyr parachutes has been proven and used by a majority of French drone pilots for more than 5 years. Countless tests and successive improvements have brought this system to a level of reliability never before achieved on a drone parachute.
\nThe pressurised gas (60 bar!) is released in a fraction of a second to propel the parachute tissue out of its container. The excess gas released (each cartridge contains several dozen litres) is used to accelerate the deployment of the trajectories and minimise height loss during parachute release.
\nThe system can be reset within seconds. The CO2 cartridge is the only consumable that is replaced after an implementation on the system, and a cartridge costs only a few euros.
\nOn the Z\u00e9phyr M300 single canvas parachute system, the CO2 emission system allows the canvas to be ejected and opened in just 1.2 s, corresponding to a 15 m height loss from an initial drop speed of about 6 m\/s.
\nThe lightest, most stable and most efficient drone parachute fabrics
\nThe new PARA\u00b2 fabrics used in Z\u00e9phyr parachute systems are the result of 3 years of development. Their innovative, ultra-lightweight design and unique design give PARA\u00b2 fabrics superior efficiency and stability. On single cloth systems, the sink rate is minimised relative to the cloth area. When used in pairs, PARA\u00b2 fabrics do not interfere with each other and optimise the overall sink rate. Each Z\u00e9phyr parachute is designed so that the web(s) keep the drone as flat as possible during its fall to minimise damage on impact.
\nOn the Z\u00e9phyr M300 single-orbit parachute system, the fall velocity for an 8 kg mass is only 3.2 m\/s, i.e. an impact energy of only 41 J, much lower than the maximum of 69 J allowed in France.
\nAn encrypted long-distance communication system
\nThe long-range communication system between the radio and the parachute is based on advanced technologies and LoRa modulation. The range can reach several kilometres in optimal conditions, and a long-range option allows it to exceed 10 km.
\nThe communication protocol is based on 869 MHz frequencies, authorisation-free (options 433 and 915 MHz possible). 128-bit encryption ensures that data is not intercepted and that the user is notified in case of communication failures.
\nPractical functions for the user
\nThe parachute, circuit breaker and radio control modules are equipped with LEDs indicating status and advanced functions.
\nWhen switched on and off, the LEDs indicate the remaining battery charge, as well as the battery level while charging. In operation, they indicate the instantaneous state of the system: correct operation, loss of radio link, low battery level...
\nCombined with a circuit breaker, the parachute lights up automatically when the drone is on. Without a signal, and if you forget to switch off the parachute or radio control, the modules automatically switch off after 10 minutes.
\nA system of timestamps and integrated logs on the parachute and radio. It records trigger actions performed by the user for diagnostic purposes.
\nLots of options... ahead of regulations!
\nThanks to the options available with Z\u00e9phyr parachutes, you are one step ahead of French and European regulations.
\nOn the remote control side, it is possible to add a second redundant trigger button. This second button avoids unwanted pressing of a single button and doubles the autonomy of the remote control. Safety caps protect the buttons from unintentional pressing. A buzzer module is available on request. It generates an audible warning in case of loss of connection to the parachute. With a long-range option, the radio range can be extended to more than 10 km if required. It is also possible to connect several radio controls to one parachute, or several parachutes to one radio control.
\nOn the parachute side, a crash detection and automatic deployment module is available on request. this module will eventually be compatible with ASTM3322 standards and future European standards (classes C5 and C6 for scenarios STS-01 and STS-02).<\/p>","protected":false},"excerpt":{"rendered":"
Parachute Zephyr for Matrice 300 RTK De Z\u00e9phyr M300 eenvoudige parachute- en stroomonderbrekermontage voor de DJI Matrice 300 RTK-drone maakt het mogelijk om uw vluchten te beveiligen en de valsnelheid van uw Matrice 300 RTK te vertragen in geval van een probleem, simpelweg door te vragen om de motoren uit te schakelen en de parachute […]<\/p>\n","protected":false},"featured_media":5299,"template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[292,97,152],"product_tag":[],"class_list":{"0":"post-5302","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-alle-parachutes","7":"product_cat-alle-producten","8":"product_cat-dji-matrice-300","9":"product_shipping_class-outofstock","10":"pa_brand-zephyr","11":"pa_productfamily-parachute","12":"pa_producttype-parachute","13":"pa_series-matrice-300","15":"first","16":"outofstock","17":"taxable","18":"shipping-taxable","19":"product-type-simple"},"acf":[],"yoast_head":"\n